Agfa Optima 335 sensor 35mm camera


or make 4 interest FREE payments of $50.00 each item fortnightly with Afterpay More info

Continue Shopping or View Cart

8/10 Overall condition comes with 6 month warranty.


The Agfa Optima Sensor 335 was the base model of range of Optima Sensor cameras made by Agfa in 1978. It was a small, rectangular 35mm film viewfinder camera.[1]

The 335 had a 40mm f3.5 Agnatar lens, with three-zone focusing, stopping down to f22. The shutter is Agfa Paratronic. The large red shutter-release button was fitted into the top of the advance lever, with a cable releasesocket on the (user's) right side of the body.

The rewind release was next to the shutter release on the top plate; this was rotated to an "R" mark for rewinding, when, unusually, the winding lever was also used for rewinding instead of a separate rewind crank.

On the front of the lens barrel, inside the lens' filter thread, there was a CdS metering cell mounted at the bottom, and a film speed dial at the top. The shutter speed was set electronically between 1/30 & 1/300s.

The window on the edge beside the shutter release contains the frame counter. On the left-hand end was a tripod socket.

The bright-line viewfinder had parallax correction marks.


Viewfinder: Large Albada finder with fixed parallax correction marks and 0.78x magnification. Red under/over exposure warning LED.

Focus: Manual 3 zone focusing.

Lens: Agfa Agnatar 40mm f/3.5 (3 Elements in 3 Groups).

Close Focus: 3' (0.9m).

Diaphragm: Stopping down to f/22.

Shutter: Agfa ParaTronic, with electronically controlled step-less speeds from 1/30th to 1/300th.

Cable Release: On users right side of the body.

Meter: CdS cells.


Instagram sample photo credit:

  1. #__arini
  2. #hargowsfilm

Collections: 35mm Point and Shoot Camera

Category: Agfa, Optima, zone focus

Type: 35mm Camera

Vendor: Agfa

Related Items